EDIFIER e10 User Manual

Power output: RMS 8W × 2 + 10W × 2 (DRC on)
Signal to noise ratio: ≥85dBA
Frequency response:
56Hz~17KHz (±6dB)
Input type:
AUX
Input sensitivity:
R/L: 700 mV ± 50mV
SW: 350 mV ± 50mV
Adjustment: Buttons on active speaker
Bass unit: 3 inch (82mm), magnetically shielded, 6 ohm
Treble unit: 1½ inch (40mm), magnetically shielded, 8 ohm
Dimension: 105(W) × 310(H) ×180(D) mm
Net Weight:
Approx. 2.4 kg
Gross Weight:
Approx. 3.0 kg
1. Connect the AUX input cable to your PC sound card, MP3 player or external audio source using the
3.5mm to 3.5mm audio connecting cable.
2. Play the selected audio on the connected device.
3. Adjust the volume to the desired level.
SpecicationsOperational guide
6
English
5
English
Power on
AUX input
1. Connect the power adapter to the speaker and then connect to the wall socket.
2. The indicator light on the front panel is now lit, the system is on. Press & hold the button for
approximately 3 seconds to put the system into standby mode. Press the button to turn the system
back on.

EDIFIER e10 Specifications

General

Tweeter	Yes
Speaker type	3-way
Driver diameter	40 mm
Woofer diameter	82 mm
Speaker position	Satellite
Number of drivers	3
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Number of woofer drivers	2
Woofer diameter (imperial)	3 \
Subwoofer driver diameter (imperial)	1.5 \
Product color	Silver
Housing material	-
Recommended usage	PC
Frequency range	48 - 20000 Hz
RMS rated power	36 W
Signal-to-Noise Ratio (SNR)	85 dB
Connectivity technology	Wired

Weight and Dimensions

Depth	180 mm
Width	105 mm
Height	310 mm
Weight	2400 g