EDIFIER MR4 User Manual

Important safety instruction
This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable
part inside. Take the product to an authorized service center for repair.
This symbol indicates that the product is for indoor use only.
This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement.
Power warning:
1. Place the product near the power outlet for easy use.
2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can
be found on the product plate.
3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time.
4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution.
5. Safety warning labels on the housing or bottom of the product or power adaptor.
The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

EDIFIER MR4 Specifications

General

Product color	Black
Housing material	MDF
Recommended usage	Studio
Tweeter	Yes
Speaker type	-
Woofer diameter	1 mm
Speaker position	Front
Tweeter diameter	2.45 mm
Number of drivers	2
Speaker enclosure	Closed
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Number of tweeter drivers	1
Woofer diameter (imperial)	9.8 \
Bluetooth	No
Connectivity technology	Wired
Frequency range	60 - 20000 Hz
RMS rated power	21 W
Speakers RMS power	42 W
Signal-to-Noise Ratio (SNR)	85 dB
Total Harmonic Distortion (THD)	0.2 %
Quantity per pack	2 pc(s)