EDIFIER S1000DB User Manual

Illustrations
5
English
6
English
②
③
④
①
⑥
⑤
⑦
1. IR Window
2. Standby/On
3. Master volume adjustment
4. Mute
5. Optical/Coaxial mode
6. AUX/PC mode
7. Bluetooth mode
Connectivity
How to load battery:
Insert a coin into the slot and rotate anti-clockwise to open the battery
compartment, install the new CR 2025 battery (+ electrode upturned) and
rotate the cover clockwise to close the compartment.
Note:
1. Do not expose the remote control to extreme heat or humidity.
2. Do not charge the batteries.
3. Remove the batteries when not in use for an extended period of time.
4. Do not expose the battery to excessive heat such as direct sun, fire, etc.
open
close
Multimedia Speaker
S1000DB
Speaker In
Power
Off On
L Speaker Out
OPT
COX
100-240V
50/60Hz
400mA
PC
AUX

EDIFIER S1000DB Specifications

General

Product color	Black, Wood
LED indicators	Yes
Housing material	Wood
Recommended usage	PC
Remote control type	IR
Multi-Room Streaming (MRS) support	-
Card reader integrated	No
Connectivity technology	Wired & Wireless
Frequency range	48 - 20000 Hz
RMS rated power	120 W
Signal-to-Noise Ratio (SNR)	85 dB
Number of drivers	4
Speaker enclosure	Closed
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	5.5 \
Power source type	AC