Efco DS 2400 T Workshop Manual

pag. 20
BRUSCHCUTTERS DS 2200 - DS 2400
Workshop manual
5. STARTER
Check condition of pulley especially in the assist
spring seat.
During re-assembly make sure the end of the
spring is correctly through the seat in the pulley.
Inspect the condition of the spring and lubricate
with a light grease or oil.
Check the condition of the seat for the return
spring.
5.
6.
7.
8.

Efco DS 2400 T Specifications

General

Brand	Efco
Model	DS 2400 T
Category	Brush Cutter
Language	English