Efco DS 2400 T Workshop Manual

BRUSCHCUTTERS DS 2200 - DS 2400
pag. 37
Workshop manual
Short block
Attention: Always do a leakdown test to check
gaskets and crankseals.
Short block with thermal ange and gasket (Fig.1).
Remove the 4 cylinder screws. When reassembling
tighten in X4 mode (Fig.2).
Slide cylinder off carefully to avoid breaking the piston
rings (Fig.3).
Check the piston rings for excessive wear. See section
on Piston failure analysis (Fig.4).
1.
2.
3.
4.
11. SHORT BLOCK

Efco DS 2400 T Specifications

General

Brand	Efco
Model	DS 2400 T
Category	Brush Cutter
Language	English