Efco DS 2400 T Workshop Manual

pag. 22
BRUSCHCUTTERS DS 2200 - DS 2400
Workshop manual
5. STARTER
Use Loctite.
Pull the rope through the eyelet and wind the pulley
and spring 8 turns. You should have at least ½ turn
before the spring bottoms out.
The recoil handle should snap into its seat.
When reassembling pull out some rope to facilitate the
seating against the pawls of the pulley.
13.
14.
15.
16.

Efco DS 2400 T Specifications

General

Brand	Efco
Model	DS 2400 T
Category	Brush Cutter
Language	English