Efco DS Series User Manual

pag. 20
BRUSCHCUTTERS DS 2200 - DS 2400
Workshop manual
5. STARTER
Check condition of pulley especially in the assist
spring seat.
During re-assembly make sure the end of the
spring is correctly through the seat in the pulley.
Inspect the condition of the spring and lubricate
with a light grease or oil.
Check the condition of the seat for the return
spring.
5.
6.
7.
8.

Efco DS Series Specifications

General

Brand	Efco
Model	DS Series
Category	Brush Cutter
Language	English