MODEL DS 2200 TR DS 2200 S DS 2200 T DS 2400 S DS 2400 T
ENGINE
TYPE Emak, 2-stroke (EPA 3, 125h) KAT
DISPLACEMENT cu. in. 1.3
BORE inch 1.26
STROKE inch 1.06
MAXIMUM POWER OUTPUT
HP/kW
(rpm)
1,1 / 0,82 (8500) 1,2 / 0,9 (8500)
MAXIMUM TORQUE Nm (rpm) 1,1 (6500) 1,2 (6500)
IDLING SPEED rpm 2800
MAXIMUM SPEED (with blade) rpm 9000 10500 10500
IGNITION SYSTEM
TYPE Digital
COIL WALBRO MBU53
SPARK PLUG NGK CMR7H
EASY START Yes
FUEL & LUBRICATION SYSTEM
Carburetor WALBRO WT-1041
FUEL Compatibility with Ethanol 15% gasoline and alkylate petrol
FUEL TANK CAPACITY . oz. 1,36
AIR FILTER Sponge cloth
PRIMER Yes
TRANSMISSION SYSTEM
TRANSMISSION tube Ø (DRIVE
SHAFT)
inch Ø .87 (Ø .24 ex) Ø .94 (Ø .24 ex) Ø .94 (Ø .27 rigid)
ROD LENGTH inch - 59
BEVEL GEAR PAIR
pin male
M8x1,25 sx
pin male M10x1,25 sx
CLUTCH COVER Plastic with aluminum drum support Aluminium
CLUTCH (DIMENSION) inch 2,13
ERGONOMICS
HARNESS Optional Single harness Optional
Single strap with
cushion
FRONT HANDLE plastic loop steel handlebar
plastic loop +
soft touch
aluminum
handlebar
REAR HANDLE plastic
plastic +
soft touch
plastic +
soft touch
ON / OFF SWITCH Button (always on)
ANTI-VIBRATION SYSTEM
Nylon Sheath + damping
rubber in clutch cover
Nylon Sheath +
damping rubber in
clutch cover+
2 rubber in
handlebar support
Nylon Sheath +
damping rubber in
clutch cover
Nylon Sheath +
damping rubber in
clutch cover+
2 rubber in
handlebar support
CUTTING SYSTEM
STANDARD CUTTING DISC unavailable Kit optional (steel blade+plastic guard) 3 teeth 10”
STANDARD NYLON STRINGHEAD
Special
Ø 3.03 inch
line .08 inch
Load &Go
Ø 4.3 inch
line .094 inch
Load &Go
Ø 4.3 inch
line .094 inch
Load &Go
Ø 5.1 inch
line .094 inch
Load &Go
Ø 5.1 inch
line .094 inch
CUTTING GUARD - CUTTING
WIDTH (with stringhead) bikini/
european style
Ø inch 15.75 14.57 15.75 14.57
WEIGHT (Without cutting tools) lb 8,3 9,04 10,6 9,2 11,57
POWER-TO-WEIGHT RATIO lb / Hp 7,5 8,2 9,6 7,7 9,6
To Next Page
Loading...
Need help?
General
