4
Clean the glass and the inside of the aperture with isopropyl alcohol on a soft clean cloth.
5
Reassemble the aperture with the protection glass slider. Make sure that the slider snaps back into its original
position.
6
Insert the aperture cover and turn it counterclockwise to lock it in place.
Safety
Follow safety guidelines to protect the ES-3000.
Do not use the instrument in environments where explosion hazard exists.
Do not use the instrument in environments with temperatures higher than 40°C or lower than 10°C.
Do not store the instrument in environments with temperatures higher than 70°C or lower than -20°C.
Protect the instrument from chemical agents, corrosive vapors, strong vibration and mechanical impact.
Use only the power supply supplied by the manufacturer. Use only accessories and spare parts supplied by the
manufacturer.
Do not spill liquids on the ES-3000.
Do not drop the ES-3000 into liquids.
Do not try to dismantle the ES-3000 for any reason. Unauthorized dismantling of the device voids all warranty
claims.
Use the ES-3000 on a stable surface and do not expose it to sunlight and moisture.
Spectrophotometer warranty information
The spectrophotometer is warranted for one year from the date of shipment from EFI. For warranty service, please
contact your dealer or printer manufacturer.
For service after the 1-year warranty period or for re-certification of the instrument to ISO standards, contact X-Rite
directly.
Only a trained service engineer at a certified service center should perform service. The measuring lamp in the
instrument should only be replaced at a certified service center.
Technical specifications
The technical specifications can be obtained from X-Rite.
Setup Guide
EFI ES-3000 Spectrophotometer
5
To Next Page
Loading...
Need help?
General
