EINHELL GC-CS 85 E User Manual

GB
- 19 -
4. Technical data
Rated voltage: ..........................220-240V ~ 50Hz
Power input: .......................... S2 20 min 85 watts
Idle speed: ..........................................5500 min
-1
Adjustment angle: ............35° to the left and right
Grinding wheel Ø (inside): ......................... 23mm
Grinding wheel Ø (outside): ............max. 108mm
Grinding wheel thickness: ....................... 3.2 mm
Protection class: ............................................ II/

Weight: ..........................................................2 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L
pA
sound pressure level ..................... 63.5 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ....................... 76.5 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 61029.
Grinding
Vibration emission value a
h
< 2.5 m/s
2
K uncertainty = 1.5 m/s
2
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
Assembly (Fig. 3-6)
•
Place the chain clamping mechanism in the
chuck (Fig. 3) and screw from underneath
using the star screw (Fig. 4)
•
Before starting the chain sharpener, fasten
it securely to a suitable surface (e.g. a work-
bench) at a suitable place (protected against
dust, dry, well-lit) using M8 fixing screws and
washers (Fig. 5)
•
Make sure when doing so that the mounting
plate of the chain sharpener is pushed onto
the surface as far as it will go (Fig. 6)
Anl_GC_CS_85_E_SPK1.indb 19Anl_GC_CS_85_E_SPK1.indb 19 03.05.16 11:5703.05.16 11:57

EINHELL GC-CS 85 E Specifications

General

Idle speed	5500 RPM
Maximum power	85 W
Continuous operating time @ maximum power	20 min
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Weight	1890 g
Package depth	255 mm
Package width	170 mm
Package height	220 mm
Package weight	1980 g