EINHELL GC-CS 85 User Manual

GB
- 21 -
cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
re that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
8.2 Changing the grinding wheel
Important! Always switch the appliance off and
unplug the power plug before carrying out any
maintenance.
1. Remove the grinding wheel (Figs. 14-16)
2. Fit a new grinding wheel
3. Assemble in reverse order
Do not use grinding wheels that are worn, broken,
cracked or otherwise damaged.
Use only genuine grinding wheels.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
Anl_GC_CS_85_SPK7.indb 21Anl_GC_CS_85_SPK7.indb 21 02.12.15 15:4302.12.15 15:43

EINHELL GC-CS 85 Specifications

General

Bore size	23 mm
Idle speed	5500 RPM
Maximum power	85 W
Grinding wheel diameter	108 mm
Grinding wheel thickness	3.2 mm
Continuous operating time @ maximum power	20 min
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Weight	1900 g
Package depth	210 mm
Package width	260 mm
Package weight	2600 g