EINHELL GC-ES 1231/1 User Manual

GB
- 22 -
10. Troubleshooting guide
Fault Possible causes Rectifi cation
Motor does not start a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block
defective
d) Connections to motor or
capacitor disconnected
e) Housing clogged
a) Check line and fuse
b) Check
c) Have machine checked by a
customer service center
d) Have machine checked by a
customer service center
e) If necessary adjust working depth.
Clean housing so that the roller can
run freely
Engine performance
drops
a) Soil is too fi rm
b) Housing clogged
c) Roller badly worn
a) Change working depth
b) Clean housing
c) Replace roller
Imprecise scarifying
result
a) roller worn
b) Wrong working depth
a) Replace roller
b) Correct working depth
Motor is running,
roller is not
rotating
a) Toothed belt is torn a) By customer service workshop
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GC_ES_1231_1_SPK9.indb 22Anl_GC_ES_1231_1_SPK9.indb 22 19.03.2018 15:19:5319.03.2018 15:19:53

EINHELL GC-ES 1231/1 Specifications

General

Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Grass catcher	-
Product color	Black, Red
Working width	310 mm
Housing material	Plastic
Number of knives	8
Working depth (max)	9 mm
Rear wheels diameter	100 mm
Front wheels diameter	180 mm
Recommended lawn area	300 m²
Adjustable working depth	Yes
Number of working depth positions	3

Weight and Dimensions

Depth	600 mm
Width	460 mm
Height	305 mm
Weight	8220 g
Package depth	480 mm
Package height	300 mm
Package weight	9890 g