EINHELL GC-ET 3023 User Manual

GB
- 12 -
Vibration emission value a
h
= 2.511 m/s
2
K uncertainty = 1.5 m/s
2
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1 Assembling the grass trimmer (Fig. 3a-5b)
•
Plug together the top handlebar (Fig. 3a/Item
5) and the bottom handlebar (Fig. 3a/Item 6)
in the direction of the arrow. Secure the hand-
lebar parts with the screw (Fig. 3b/Item 10).
•
Push the additional handle (Fig. 4/Item 4)
onto the top handlebar (Fig. 4 / Item 5).
•
Plug the guard hood with screw (Fig. 5a/Item
7) onto the motor head as far as the stop.
•
Secure the guard hood with the screw (Fig.
5b/Item 8).
6. Operation
The grass trimmer has a semi-automatic line
extension system. Each time you activate the
semi-automatic line extension system, the line
is automatically extended to ensure that you can
cut your lawn with the perfect cutting width at all
times. Please note that the more often you activa-
te the semi-automatic line extension system, the
more the line will wear.
Caution: If the line is too long when you use the
equipment for the fi rst time, the surplus end of it
will be cut by the blade on the guard hood.
If the line is too short when you start the machi-
ne for the fi rst time, press the knob on the line
spool and pull the line hard. When you start the
equipment again the line will be cut to the perfect
length automatically.
Your grass trimmer will work at its best if you ob-
serve the following instructions:
•
Never use the grass trimmer without its safety
devices.
•
Do not cut grass when it is wet. The best re-
sults are had on dry grass.
•
Connect the power cable to the extension
cable and fasten this to the strain-relief clamp
(Figure 6/Item A).
•
To switch on your grass trimmer, press the
Anl_GC_ET_3023_EX_UK_SPK7.indb 12Anl_GC_ET_3023_EX_UK_SPK7.indb 12 29.09.2023 11:44:5029.09.2023 11:44:50

EINHELL GC-ET 3023 Specifications

General

Brand	EINHELL
Model	GC-ET 3023
Category	Trimmer
Language	English