EINHELL GC-ET 4530 Operating Instructions

EN
- 13 -
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
1x String trimmer
•
1x Safety guard
•
1x Edge roller
•
4 Screws
•
Original operating instruction with safety
information
3. Intended use
The equipment is designed for cutting lawns
and small areas of grass in private and hobby
gardens.
Equipment designed for use in private and
hobby gardens is regarded as unsuitable for
use in public facilities, parks and sports centers,
along roadways, or in agriculture and forestry.
The operating instructions as supplied by the
manufacturer must be kept and referred to in
order to ensure that the equipment is properly
used and maintained.
Important. This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Mains voltage .................................120V ~ 60 Hz
Power/amperage ............................... 480 W (4A)
Cutting width: ................................................. 12"
No load speed RPM: ................................... 8800
Trimmer line diameter: ............................... 0.055"
Trimmer line length: ....................................32.8 ft.
Weight (Tool only): .....................................5.7 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment‘s construction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Anl_GC_ET_4530_SPK7_USA.indb 13Anl_GC_ET_4530_SPK7_USA.indb 13 21.12.2022 08:57:2421.12.2022 08:57:24

EINHELL GC-ET 4530 Specifications

General

Power source	Electric AC
AC input voltage	230 V
AC input frequency	50 Hz
Line diameter	1.4 mm
Product color	Aluminium, Black, Orange
Rotational speed	8800 RPM
Secondary handle	Yes
Line length supplied	10 m
Cutting diameter (max)	300 mm

Weight and Dimensions

Depth	940 mm
Width	255 mm
Length	140 mm
Weight	2640 g