EINHELL GC-HM 40 User Manual

GB
- 18 -
10. Troubleshooting
If the equipment is operated properly you should experience no problems with malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you contact your customer
services.
Problem Possible cause Remedy
Unusual noises - Loose screws/parts?
- Foreign bodies in the blade?
- Damaged blade?
- Wrongly adjusted bladed?
- Tighten the screws
- Remove the foreign bodies
- Have the blade replaced
- Set the counter blade (see 7.2.1)
Unsatisfactory cut-
ting results
- Wrongly adjusted bladed?
- Blunt blade?
- Set the counter blade (see 7.2.1)
- Have the blade sharpened or repla-
ced
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_GC_HM_40_SPK7.indb 18Anl_GC_HM_40_SPK7.indb 18 02.06.15 12:0102.06.15 12:01

EINHELL GC-HM 40 Specifications

General

Brand	EINHELL
Model	GC-HM 40
Category	Lawn Mower
Language	English