EINHELL GC-RT 1545 M User Manual

GB
- 13 -
11. Troubleshooting guide
Fault Possible causes Remedy
Motor does not start - No power at the plug
- Cable defective
- Switch/plug block defective
- Motor terminals or capacitor
disconnected
- excessive working depth
- Check the power cable and fuse
- Check
- By customer service workshop
- By customer service workshop
- Reduce working depth
Motor performance
drops
- Soil too hard
- Blades badly worn
- Correct working depth
- Replace hoe blades
Notice! For protection, the motor is equipped with a thermal switch which cuts out when the
motor is overloaded and switches on again automatically after a short cooling period.
Anl_GC-RT_1545_GB_Korea.indb 13Anl_GC-RT_1545_GB_Korea.indb 13 29.04.2022 09:05:3429.04.2022 09:05:34

EINHELL GC-RT 1545 M Specifications

General

Brand	EINHELL
Model	GC-RT 1545 M
Category	Lawn and Garden Equipment
Language	English