EINHELL GE-EH 6560 User Manual

GB
- 20 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Blade guide, Carbon brushes
Consumables* Blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
GE_EH_6560_7067_SPK7.indb 20GE_EH_6560_7067_SPK7.indb 20 16.09.2016 10:40:4016.09.2016 10:40:40

EINHELL GE-EH 6560 Specifications

General

Blade size	660 mm
Blade type	Single blade
Product color	Black, Red
Blade tooth spacing	30 mm
Engine power	650 W
Power source	AC
AC input voltage	220-240 V
AC input frequency	50 Hz

Weight and Dimensions

Weight	3400 g