7-2. Using the USB Hub Function
This monitor is equipped with a USB hub. It functions as a USB hub when connected to a USB-
compatible PC, allowing the connection of peripheral USB devices.
●
Connection Procedure
1. Connect a USB-C cable (CC200SS-5A or CC200SSW-5A).
2. If necessary, connect a mouse, keyboard, or other device to the USB downstream port.
USB-C
USB-C
USB cable
(USB-C - USB-C)
CC200SS-5A
or
CC200SSW-5A
(Included)
USB-A
Downstream
Attention
• This function may not work depending on the computer you are using, your OS and your peripheral devices.
Contact the manufacturer of each device for information about USB compatibility.
• Even when the monitor is in power saving mode, devices connected to the USB downstream port are operational.
Due to this, the power consumption of the monitor varies depending on the connected devices, even in power
saving mode.
• When the main power of the monitor is o, a device connected to the USB downstream port will not operate.
• When “Compatibility Mode” (page 26) is set to “O” and the power of the monitor is turned o, devices
connected to the USB downstream port are not operational.
Note
• For PCs that are not equipped with a USB-C connector, use a commercially available USB-A - USB-C converter
cable or adapter.
• This product supports USB 3.1 Gen 1. When connecting to peripheral devices that support USB 3.1 Gen 1, high-
speed data communication is possible.
36
Chapter 7 Reference
To Next Page
Loading...
Need help?
General