To Next Page

To Previous Page

Chapter 2 Settings and Adjustments

2-6 Setting On/Off for the automatic

brightness adjustment function

[Auto EcoView]

The sensor on the front side of the monitor detects the environmental brightness

to adjust the screen brightness automatically and comfortably by using the Auto

EcoView function.

(1) Press .

The <Auto EcoView> setting menu appears.

(2) The On/Off setting is toggled by pressing .

2-7 Setting On/Off for Power Saving mode

[Power Save]

This function allows you to set the monitor into the power saving mode

according to the PC status.

(1) Choose <PowerManager> from the Adjustment menu, and press .

(2) Choose <Power Save> from the <PowerManager> menu, and press .

The <Power Save> setting menu appears.

(3) Select “On” or “Off” with or , and press .

The setting is completed.

■

Analog input

This monitor complies with the VESA DPMS standard.

[Power Saving System]

PC Monitor

Power

Indicator

Operating Operating Blue

Power saving STAND-BY

SUSPENDED

OFF

Power saving Orange

■

Digital input

This monitor complies with the DVI DMPM standard.

[Power Saving System]

The monitor enters the power saving mode in ve seconds in connection with

the PC setting.

PC Monitor Power Indicator

Operating Operating Blue

Power saving Power saving Orange

NOTE

• Be careful not to block the sensor on

the lower side of the monitor when

using the Auto EcoView function.

NOTE

• Be careful not to block the sensor on

the lower side of the monitor when

using the Auto EcoView function.

Attention

• Turning off the main power switch

or unplugging the power cord

completely shuts off power supply to

the monitor.

• Devices connected to the USB port

(upstream and downstream) work

when the monitor is in power saving

mode or when the power button of

the monitor is Off. Therefore, power

consumption of the monitor varies

with connected devices even in the

power saving mode.

• Power consumption varies even

when the stereo mini jack cable is

connected.