INSTALLATION
29/56
EN
– drain any fuel still inside the burner and in the fuel delivery pipe and collect it in a basin
– loosen the pipe clamp (7) and remove the air intake pipe (8), if present
8
7
Fig. 25
– loosen the nut (9) securing the burner to the boiler and, rotating the burner (10) slightly to the
right, slide it off the boiler.
10
9
Fig. 26
CAUTION
Dispose of any fuel that comes out of the burner in accordance with applicable legislation in the
destination country. Separated waste management avoids potential damage to the environment
and peoples’ health. It also allows many recyclable materials to be recovered, with signicant
economic and energy savings.
To Next Page
Loading...
Need help?
General