Programme
1)2)
Water (l) Energy (kWh) Duration (min)
Pre-rinse 5.1 0.040 15
1h 11.7 0.845 60
1h 30min 11.5 1.000 90
2h 40min 12.0 1.009 160
ECO 10.5 0.735 240
AUTO Sense 11.9 0.964 170
Machine Care 9.9 0.636 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
info.test@dishwasher-production.com
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
6. BASIC SETTINGS
You can configure the appliance by changing basic settings according to your needs.
You can also view the number of completed cycles and restore the factory defaults.
Number Setting Values
Description
1)
1 Water hard‐
ness
1L - 10L (de‐
fault: 5L)
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
2 Rinse aid level 0A - 6A (de‐
fault: 4A)
Adjust the level of the rinse aid accord‐
ing to the necessary dosage.
3 End sound On
Off (default)
Activate or deactivate the acoustic signal
for the end of a programme.
4 Auto door open On (default)
Off
Activate or deactivate the AirDry.
5 Key tones On (default)
Off
Activate or deactivate the sound of the
buttons when pressed.
6 Latest pro‐
gramme selec‐
tion
On
Off (default)
Enable or disable the automatic selec‐
tion of the most recently used pro‐
gramme and options.
1)
For more details, refer to the information provided in this chapter.
ENGLISH 11
To Next Page
Loading...
Need help?
General
