Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service
AOS OVENS - Service Manual
(595889300 – ENG)
APPENDIX I – CONNECTION TO HACCP SYSTEM
The AOS oven (from firmware 2.7) can be predisposed for the HACCP system through 4 parameters:
HCCP: defines the type of HACCP, i.e.
0: no system
1: HACCP Basic (with printer 881457 – 880048 for US market, i.e. 120V/1ph/60 Hz)
2: HACCP Advanced or Integrated
bAud: bit rate of RS485 connection
Addr: address of the appliance in the HACCP Advanced network
tPrn: print frequency in case of HACCP Basic (value in seconds)
In case of HACCP Basic, i.e. setting HCCP to 1, to use the printer 881457 (or 880048) and print with the
printing frequency given through parameter tPrn, set on the printer the following parameters:
PROTOCOL = 8,E,1
BAUD RATE = 9600
PRINT = REVERSE
40 COLUMNS (font 9x24)
RS485 INTERFACE NO id
In case of HACCP Advanced or Integrated, i.e. setting HCCP to 2, the address of the oven in the AHCCP
network has to be set in the parameter Addr.
File: AOS service manual (ENG).008 ©Copyright 2002 by Electrolux Professional P.40/40
To Previous Page
Loading...
Need help?
General
