C4 WASTE BIN (DISPOSAL OF ORGANIC WASTE)
The collection bin is located at the front of the COMPACT (note photograph below). Ensure that it is directly
beneath the exit chute of the Press to prevent spilling of waste product. It is important that the waste bin is
correctly positioned and NOT overfilled with waste.
PRESS EXIT
CHUTE
Although the organic waste that you are processing will decrease in volume by up to 50/60%, the
weight of that waste will NOT decrease. As a guide to this operation, the waste bin should only be
filled up to half way i.e. 50% and should it be found that the bin is too heavy for one individual to lift
for final disposal, in to the skip/dumpster assistance MUST be sought.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : PROCESSED WASTE IS HEAVY. DO NOT
TO OVERFILL THE WASTE
COLLECTION BIN
As an aid to the disposal of the waste and in the interest of hygiene a plastic bag can be inserted into the bin
(Part Ref: 1600/300g). This will help with the final disposal of the waste into a skip/dumpster; it is
recommended that the neck of the plastic bag is sealed before disposal.
C5 CLEANING & DAILY MAINTENANCE
INTRODUCTION
The COMPACT is self cleaning in operation however in the interests of Hygiene, a safe working environment
and to ensure the continuing reliability of the COMPACT it is important that it and the surrounding work area
are kept clean and tidy. It is critical that the recommendations for cleaning are followed, including the using
only approved substances to aid degreasing as aggressive detergents will damage the machine’s internal
components.
When accessing Sink ALWAYS lock Chute Lid into open position
Page 15 of 20
To Next Page
Loading...
Need help?
General