Electrolux E6EC1 Series User Manual

10 www.electrolux.com
PROBLEM POSSIBLE CAUSE SOLUTION
One-cup indicator and two-cup
indicator blinking quickly.
Make hot water for 40ml and then the
steam knob is not reset.
Reset steam knob to “OFF”
position.
The steam knob is not reset after cooling
down.
Boiler temperature is too high. Cool it down by perform
Step 11.
One-cup indicator, two-cup indicator
and steam indicator blinking quickly.
The steam knob is not reset, but the
machine is turned on.
Reset steam knob to “OFF”
position.
ALL indicators blinking at the same
time for 5 times.
Need descaling. Perform decalcifying.
Filter holder is too tight to operate. Too much coee powder lled in lter. Fill lter cup with less coee
powder.
Coee ows drip by drip. Too much powder. Fill lter cup with less coee
powder.
Too ne coee powder and tamped
too tight.
Make more coarse coee
powder or tamp coee powder
with less force.
Filter cup blocked. Clean the lter cup with
cleaning pin.
DISPOSAL
Recycle the materials with the symbol . The packaging materials can be recycled. Please sort individual
components by type and dispose them in applicable containers according to local disposal instructions.
Recycling of packaging materials reduces the use of raw materials and amount of waste in landll sites. Help
protect the environment and human health by recycling your packaging.
Do not dispose appliances marked with the symbol with the household waste. Return the product to your
local recycling facility or contact your municipal oce.
Electrolux reserves the right to change products, information and specications without notice.
For Switzerland:
Where should you take your old equipment?
Anywhere that sells new equipment or hand it in to
ocial SENS collection points or ocial SENS recycling
rms. The list of ocial SENS collection points can be
found at www.erecycling.ch

Electrolux E6EC1 Series Specifications

General

Brand	Electrolux
Model	E6EC1 Series
Category	Coffee Maker
Language	English