Electrolux EGD6576NOK User Manual

1. Remove the pan supports to easily
clean the hob.
Be very careful when
you replace the pan
supports to prevent the
hob top from damage.
2. The enamel coating occasionally can
have rough edges, so be careful
when you wash the pan supports by
hand and dry them. If necessary,
remove stubborn stains with a paste
cleaner.
3. After you clean the pan supports,
make sure that they are in correct
positions.
4. For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
7.3 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the
glass surface at an acute angle and
move the blade on the surface.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and a non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
• To clean the enamelled parts, caps
and crowns, wash them with warm
soapy water and dry them carefully
before you put them back on.
7.4 Cleaning the spark plug
This feature is obtained through a
ceramic ignition candle with a metal
electrode. Keep these components well
clean to prevent difficult lighting and
check that the burner crown holes are
not obstructed.
7.5 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the
conditions of the gas supply pipe and the
pressure adjuster, if fitted.
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem Possible cause Remedy
You cannot activate or op‐
erate the hob.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
The fuse is blown. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
ENGLISH 21

Electrolux EGD6576NOK Specifications

General

Hob type	Combi
Frame type	Frameless
Product color	Black
Hob width size	60 cm
Top surface type	-
Appliance placement	Built-in
Cooking zone 1 type	Simmer
Cooking zone 2 type	Large
Cooking zone 4 type	Regular
Cooking zone 1 boost	2500 W
Cooking zone 1 power	1900 W
Cooking zone 1 shape	Round
Cooking zone 2 boost	3300 W
Cooking zone 2 power	2300 W
Cooking zone 3 power	2700 W
Cooking zone 4 power	1400 W
Pan support material	Cast iron
Cooking zone 1 diameter	70 mm
Cooking zone 1 position	Right front
Cooking zone 2 diameter	210 mm
Cooking zone 2 position	Left front
Cooking zone 3 diameter	100 mm
Cooking zone 3 position	Right rear
Cooking zone 4 diameter	140 mm
Cooking zone 4 position	Left rear
Number of cooking zones	4 zone(s)
Cooking zone 1 power source	Electric
Cooking zone 3 power source	Gas
Number of gas cooking zones	2 zone(s)
Timer	Yes
Control type	Touch, Rotary
Control position	Top front
AC input voltage	230 V
AC input frequency	50 Hz
Connected load (gas)	4800 W
Connected load (electric)	3700 W
Package depth	630 mm
Package width	720 mm
Package height	160 mm
Package weight	12100 g

Weight and Dimensions

Depth	520 mm
Width	590 mm
Height	50 mm
Weight	11500 g
Cord length	1.1 m
Installation compartment depth	490 mm
Installation compartment width	560 mm