5
Control panel
1. Hr button
2. Start button
3. Set Timer button
4. Timer On/Off button
5. Time display
6. Min button
7. Stop button
8. 1-4Cup button
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Carefully unpack the appliance and remove all packaging materials.
Wipe the appliance with a slightly damp cloth. Dry thoroughly.
It is recommended to wash the drip coffee system before first use.
Fill the water tank with cold water and follow the directions for making drip coffee to
make at least two carafes of coffee without using ground coffee.
MAKING DRIP COFFEE
Make sure the appliance is plugged in. The display will show “0:00”.
1. Place the appliance on dry, level and heat-resistant surface, away from any edge.
2. Open the cover and fill the tank with water with fresh, cold water.
The markings on the water window and carafe indicate level of water required
to brew the desired number of cups.
To avoid overflow, do not fill the water tank with water past the 12-cup line.
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
