- 9 -
Technical specifications
Service and spare parts
Servicing and repairs must be carried out by a service
company authorized by the supplier. Use only spare
parts supplied by these.
Before calling service, use the trouble shooting table
”In the event of a fault” to try to attend to the fault yourself.
Note that electrical faults shall always be rectified by a
certified electrician.
Give the appliance’s model designation, product- and
serial numbers according to the data plate affixed to the
rear of the dishwasher.
You can record these details here:
TYPE. ............................................................
MOD. ............................................................
PROD.NO. ............................................................
SER.NO. ............................................................
Purchase date............................................................
SAVE YOUR RECEIPT AS PROOF OF YOUR
GUARANTEE.
Service
Installation instructions
Capacity: 5 place settings accordance EN 50242
Dimensions: Height 460 mm
Width 450 mm
Depth 480 mm
Weight: Net 17 kg
Water pressures: Minimum 50 kPa (0,5 bar)
Maximum 1000 kPa (10 bar)
Water temperature: Maximum 65° C
Electrical data: Power supply 230 V - 50 Hz
Fuse 10 A
Heating element 1200 W
Power rating 1280 W
To Next Page
Loading...
Need help?
General
