Control panel
1 Programme guide
2 Programme knob
3 Star/cancel button (Cancel)
4 Delay start button (Delay)
5 Indicator lights
6 Programme marker
7 On/off indicator light
Indicator lights
Wash Comes on when the washing phase or the rinsing phases operate.
Dry Comes on when the drying phase operates.
End-of-programme Comes on when the washing programme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
Salt
1)
Comes on when it is necessary to fill the salt container. Refer to the chapter
'Use of dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on for
some hours. This does not have an unwanted effect on the operation of the
appliance.
Rinse aid
1)
Comes on when it is necessary to fill the rinse aid dispenser. Refer to the
chapter 'Use of rinse aid'.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
Programme knob and on/off indicator
light
• To set a washing programme, turn the
programme knob clockwise or anticlock-
wise. The programme marker on the pro-
gramme knob must agree with one of the
washing programmes on the control pan-
el.
– The on/off indicator light comes on (po-
sition ON).
• To set the appliance to the off position,
turn the programme knob until the pro-
gramme marker agrees with the on/off in-
dicator light.
– The on/off indicator light goes off (posi-
tion OFF).
Delay start button
Use the delay start button to delay the start
of the washing programme with an interval of
22 electrolux
To Next Page
Loading...
Need help?
General
Weight and Dimensions
