1
56
7
8
4
23
English
BEFORE STARTING
1 Check that the s-bag™ is in place.
2 Insert the hose until the catch clicks to engage (press the
catch to release the hose).
3 Attach the telescopic tube to the hose handle and the floor
nozzle (to disconnect, push locking catch to dismantle).
4 Extend the cable and connect it to the mains. Press the
foot pedal to rewind the cable (take hold of the plug to
prevent it striking you).
5 Move the switch-on foot pedal forwards to allow the cable
to reel freely in and out as required.
Move the switch-on foot pedal backwards to lock the
extended cable.
6 Press the on/off button with the foot to start the vacuum
cleaner.
7 Adjust suction power using the suction control on the
vacuum cleaner or the suction control on the hose handle.
8 Press the +/- buttons to adjust suction control (be sure
batteries have been inserted beforehand).
To Next Page
Loading...
Need help?
General
