22
Dimensions
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the appliance ever
has to be transported again.
1. After removing all the packaging, carefully
lay the appliance on its back. Use a rug,
blanket or piece of cardboard to protect the
floor.
2. Remove the polystyrene base from the
bottom and the shipping plug.
3. Carefully return the appliance to an upright
position.
4. With a suitable spanner unscrew and
remove the following from the rear of the
appliance:
- 4 shipping bolts
- 4 spacers
- 3 plastic "P" clamp
5. Remove the power supply cable, the
draining hose and the inlet hose from the
hose clips on the rear of the appliance.
60.33
55.88
To Next Page
Loading...
