3332
1 BASIC PROGRAMMING
This enables the implementation of the Adjustment, Maintenance and Data Management
functions listed below.
It also facilitates the providing of telephonic assistance.
Basic Programming is the exclusive responsibility of the installer/service technician .
It is carried out with the key provided, which enables to use the following display menu:
- LANGUAGE SELECTION
- TIME AND DATE SETTING
- NIGHT CYCLE PROGRAMMING
- BREWING TEMPERATURE SETTING
- CRONO SETUP
- SCHEDULED MAINTENANCE ALERTS RESET
- COFFEE PRODUCTION DISPLAY AND RESET
- WATER CONSUMPTION DISPLAY AND RESET
1) Insert the key in the lock on the control panel, gently press and turn it clockwise:
the machine automatically enters a state of partial operation suitable for programming.
2) The instructions for the using the main menu appear on the display: after confirming
by pressing “ENTER” on the control panel, press any of the coffee buttons marked with
the “+” sign to scroll the menu to reach the desired topic.
3) Press “ENTER” to confirm the choice of the topic and access the submenu for the function
concerned. To change numerical values press the “+” and “-“ keys to increase or decrease
respectively. Then save the data by pressing “ENTER”
4) Upon completing programming or consultation of the various
topics, turn the key counter-clockwise and remove it
from the lock: the machine automatically resumes full operation.
ADJUSTMENTSC
To Next Page
Loading...
Need help?
General
