Elgato FACECAM PRO - User Manual

Applicant Name (󻹝󽏔󻠡): Corsair Memory, Inc.
Product Name (󼖸󽈤󻠡󼰉): Elgato Facecam Pro
Model No. (󻡄󻄔󻠡): 20WAB9901
Manufactured Year & Month (󼖸󼘌󼎌󼑰: Please refer to gift box sticker
Manufacturer & Origin (󼖸󼘌󼔬󾘥󻦫󾘥󼖸󼘌󺬉󺦜): Corsair Memory, Inc./ Made in Taiwan
A/S : (󼚘󼲐󼁀󻯨, 1522-1460
Elgato, a division of:
Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA
Corsair Components Limited, 1020 Eskdale Road, Winnersh Triangle, Wokingham, RG41 5TS, UK
Corsair Memory, BV Wormerweg 8, 1311 XB, Almere, Netherlands
Copyright 2021 - 2022 Corsair Memory Inc. All rights reserved. Elgato and the Elgato logo are trademarks of Corsair Memory Inc., registered in the U.S.
and other countries. SONY and STARVIS are registered trademarks of Sony Corporation. All other trademarks belong to their respective owner.
Part: 51WAB9903
R-R-CSI-20WAB9901
Quick Start Guide

Summary

Mounting

Mount on Monitor

Secure the camera to your monitor using its built-in clip.

Attach to Multi Mount

Attach the camera to an Elgato Multi Mount system via the 1/4-inch thread.

Installation

Download Camera Hub App

Download and install the Camera Hub application from the official website.

Connect to USB 3.0 Port

Connect the camera directly to a USB 3.0 port on your PC or Mac.

Maintenance

Keep Vents Clear

Ensure air vents are unobstructed to prevent overheating.

Clean the Lens

Wipe the lens gently with a soft, lint-free cloth.

Reset

Restore Factory Defaults

Hold the RESET button for five seconds to restore default settings.

Technical Specifications

Elgato FACECAM PRO Specifications

General

Aperture	f/2.0
Connection	USB-C
Focus Range	10 cm to infinity
HDR	Yes
Microphone	No
Focus Type	Fixed Focus
Frame Rate	60 fps
Field of View	82 degrees
Sensor Type	CMOS
Operating System	Windows / macOS
Focal Length	24 mm
Mounting	1/4" Thread, Monitor Mount