Emerson Nickelodeon SpongeBob SquarePants SB315 User Manual

11
VCR CONNECTIONS
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable (CABLES NOT INCLUDED).
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect a 75 ohm coaxial cable from the VCR’s 75 ohm OUT jack to the ANT jack on the rear of the TV.
3. Press the AV IN button until regular
TV or CATV appears on the TV screen and press PLAY on the VCR to watch a
tape.
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect the audio cable from the VCR’s Audio OUT jack to the TV’s Audio IN jack. Connect the video cable from the
VCR’s Video OUT jack to the TV’s Video IN jack.
3. Press the AV IN button until AV appears on the TV screen and press PLAY on the VCR to watch a tape.
Follow the instructions below to connect a VCR to your television using Audio/Video cables (CABLES NOT INCLUDED).
NOTE:
Above are basic connection instructions; for detailed connection instructions for external units, refer to the external unit’s
owner’s manual.
VCR
From V CR OUT jack
INCOMING CATV CABLE
VCR
AUDIO/VIDEO Cord
To TV IN jacks
From V CR OUT jacks
INCOMING CATV CABLE

Emerson Nickelodeon SpongeBob SquarePants SB315 Specifications

General

Brand	Emerson
Model	Nickelodeon SpongeBob SquarePants SB315
Category	CRT TV
Language	English