PART NO. 37-7842001
2102
1F75H-21NP (Non-Programmable)
Installation and Operating Instructions
Heat Pump Thermostat
Battery Powered or Hardwired with Common
Thermostat Applications
Maximum
Stages
Heat /Cool
Single Stage Compressor, Heat Pump
Systems (air source or geothermal) –
1 Stage Aux/Emergency Heat
2/1
Thermostat Installation
2-4
Wiring
2
Installer Menu
3-4
Using the Thermostat
5
Thermostat Overview
5
Troubleshooting
6-7
Homeowner Help Line
8
INDEX
MERCURY NOTICE: This product does not contain
mercury. However, this product may replace a product
that contains mercury. Mercury and products containing
mercury must not be discarded in household trash.
Refer to www.thermostat-recycle.org for information
on disposing of products containing mercury.
Electrical Rating:
Battery Power
..................................... 20 to 30 VAC, NEC Class II, 50/60 Hz
Input-Hardwire
.................................... 20 to 30 VAC, NEC Class II, 50/60 Hz
Terminal Load
.......................................... 1.5 A per terminal, 2.5A maximum all terminals combined
Setpoint Range
........................................ 45° to 99° F (7° to 37° C)
Rated Dierentials (@ 6
°F/ Hr): Fast Med Slow
Heat Pump (Heat)................................ 0.9°F 1.2°F 1.7°F
Heat Pump (Cool) ................................ 0.9°F 1.2°F 1.7°F
Auxiliary Heat ...................................... 0.5°F 0.75°F 1.9°F
Operating Ambient .................................. 32°F to +105°F (0° to +41°C)
Display Temperature Range
....................... 32°F to +99°F (0 to 37°C)
Operating Humidity ................................. 90% non-condensing maximum
Shipping Temperature Range
................... -20°F to + 150°F (-29° to +65°C)
Thermostat Dimensions
........................... 3-3/4” H x 6” W x 1-1/8” D
SPECIFICATIONS
N
O
DE PIÈCE 37-7842001
2102
1F75H-21NP (non programmable)
Instructions d’installation et d’utilisation
Thermostat avec thermopompe
Alimentation par piles ou câblée avec l commun
Applications du thermostat
Nombre
maximum
d’étages
chauage/
climatisation
Systèmes thermopompe à compresseur
mono-étage (source d’air ou
géothermique) – 1 étage chauage
auxiliaire/d’urgence
2/1
Installation du thermostat
2-4
Câblage
2
Menu de l’installateur
3-4
Utilisation du thermostat
5
Aperçu du thermostat
5
Dépannage
6-7
Ligne d’assistance pour les
propriétaires
8
INDEX
AVIS RELATIF AU MERCURE : Ce produit ne contient pas
de mercure. Il peut toutefois remplacer un produit qui en
contient. Le mercure et les produits contenant du mercure
ne doivent pas être jetés dans les ordures ménagères.
Consultez le site www.thermostat-recycle.org pour
connaître les endroits où vous pouvez envoyer le produit
contenant du mercure.
Paramètres électriques :
Batterie
................................................... 20 à 30 V c.a., NEC classe II, 50/60 Hz
Câblé
...................................................... 20 à 30 V c.a., NEC classe II, 50/60 Hz
Charge à la borne
......................................... 1,5 A par borne, 2,5 A maximum pour toutes les bornes combinées
Plage de réglage
.......................................... 45 à 99 °F (7 à 37 °C)
Diérentiels nominaux (@ 6
°F/h) : Rapide Moyen Lent
Thermopompe (chauage) ..................... 0,9 °F 1,2 °F 1,7 °F
Thermopompe (climatisation) ................. 0,9 °F 1,2 °F 1,7 °F
Chauage auxiliaire ................................ 0,5 °F 0,75 °F 1,9 °F
Température ambiante de fonctionnement . 32 °F à +105 °F (0 à +41 °C)
Plage de températures achées
.................... 32 °F à +99 °F (0 à 37 °C)
Humidité de fonctionnement ....................... 90 % max. sans condensation
Plage de températures d’expédition
............. -20 °F à + 150 °F (-29 à +65 °C)
Dimensions du thermostat
........................... 3-3/4 po H x 6 po L x 1-1/8 po P
SPÉCIFICATIONS
Accessoire en opon : plaque murale F61-2663, 6 3/4 po L x 4 1/2 po H
Optional Accessory: Wall
Cover-Up Plate F61-2663,
6 3/4” W x 4 1/2” H
emerson.com/white-rodgers
emerson.com/white-rodgers
Programming
made Simple
See page 7