For more information please call us on 01993 824900 or view our website at www.emmeti.co.uk
CS-17 Zona Touch - Touchscreen Programmable Thermostat
Buttons and LCD Display
Button / Icon Description Button / Icon Description Button / Icon Description
Turning on/off
thermostat
Programmed
operation
Internal air sensing
Menu and
program button
Temporary
override
Remote air
sensing
Set time and
weekday / Confirm
settings
Holiday mode
Remote floor
sensing
Increase the set
value
Frost protection
Internal air sensing
with remote floor
sensing cut off
Decrease the set
value
Program number
Key Lock Call for heat
Configuration Menu
To enter the settings menu please follow the steps below:
Step 1: Turn the thermostat off by pressing
.
Step 2: Press
for 3 seconds, you will then see menu 01.
Step 3: Use the up and down arrows to adjust the ‘sensor
selection’ which is in menu 01 (air sensing, air
remote, floor remote or air and floor).
Step 4: Press
to cycle through the configuration menus.
Step 5: Press
to accept and store.
To Next Page
Need help?
General
