Envirovent PIV AIR SOURCE Installation Guide

AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
DO NOT
THROW AWAY
10
Installation
1. Place a dust sheet below the required ceiling diffuser position and
check the ceiling below and loft space above are unobstructed.
2. a) For PIV units mark a 222mm diffuser hole using the template.
2. b) For MIV units mark two 105mm diffuser holes
(see page 9 for positioning information).
3. Wearing a dust mask and eye protection, cut out the hole/s.
2b
2a1
3

Envirovent PIV AIR SOURCE Specifications

General

Brand	Envirovent
Model	PIV AIR SOURCE
Category	Fan
Language	English