© 2019 Episode®
Rev: 191023-1520
SPECIFICATIONS
2D-200 8D/12D/16D-100
Continuous Power Output
All Channels Driven
100 watts RMS at 8 ohms
200 watts RMS at 4 ohms
50 watts RMS at 8ohms
100 watts RMS at 4ohms
Bridged Power Output
All Channels Driven
N/A 200 watts RMS at 8ohms
Input Sensitivity
500mV 500mV
Input Impedance
20,000 ohms 20,000 ohms
S/N Ratio
95dB 95dB
Frequency Response
20Hz to 20kHz 20Hz to 20kHz
Distortion
0.1% THD 20Hz - 20kHz 0.1% THD 20Hz - 20kHz
Dimensions
9.84* 7.87 *1.70 11.81*17.17*3.45
Operating Temperature
14°F - 104°F 14° - 104°F
Weight
3.08 lb. 10.8 lb.
Certification
UL Listed UL Listed
WARRANTY
2-Year Limited Warranty
Episode® Amplifiers have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This warranty shall
not apply to products which have been abused, modified or disassembled. Products to be repaired under this
warranty must be returned to the SnapAV or a designated service center with prior notification and an assigned
Return Authorization (RA) number.
CONTACTING TECHNICAL SUPPORT
As a thank you for purchasing Episode® Electronics products, direct technical support services are available via
phone or e-mail. We encourage you to use this resource for any questions or concerns about our products. Visit our
website for more support documentation.
(866) 838-5052
techsupport@snapav.com
snapav.com
WARNING: This product may expose you to chemicals known to the State of California to cause cancer
and reproductive harm. For more information go to www.P65Warnings.ca.gov.
To Previous Page
Loading...
Need help?
General