If the projector you want to connect to is not found automatically, you can search for the target
projector by using the SSID, IP address, or a projector name. By using Advanced Connection Mode,
you can search for projectors at remote locations on a different subnet.
• Searching for Network Projectors Using a Profile
You can save network projector information as a profile, and then specify the profile to search for the
same projector instead of providing projector details each time you search. For example, by creating a
group of profiles for each place where a projector is setup and managing them with folders, the target
projector can be found quickly.
Parent topic: Changing the Projector Search Method
Searching for Network Projectors Automatically
You can automatically search for available projectors on the network, and then project images by simply
selecting the projector.
Click the Automatic search button to start a search. The search takes about 30 seconds.
The search results are displayed.
If you cannot find any projectors, try one of the other search methods.
Parent topic: Changing the Projector Search Method
32