LX - 810 DOT - MATRIX PRINTER
Paper weight:
Single sheet:
Continuous paper:
Multi-part forms:
Roll paper:
Envelope:
Paper thickness:
Single sheet:
Continuous paper:
Roll paper:
Envelope:
Abel:
14 lb to 24 lb
(52 g/m2 to 9-J g/m*)
14 lb to 22 lb
(52
g/m’
to 62
g/m’)
[12
lb to 15 lb]
X
N
([45 g/m* to 56 g/m*]
X
N)
Ns3
14 lb to 17 lb
(52
g/m’
to 64
g/m’)
12 lb to 24 lb
(45 g/m2 to 90 g/m*)
0.065 to 0.140 mm
(0.0025 to 0.0055”)
0.065 to 0.250 mm
(0.0025 to 0.0098”)
0.070 to 0.090 mm
(0.0028 to 0.0035”)
0.160 to 0.520 mm
(0.0063 to 0.0197”)
0.160 to 0.190 mm
(0.0063 to 0.0075”)
including the base
sheet
Copy capacity:
Up to 3 sheets including the original. Total
thickness must not exceed 0.25 mm
(0.0098”).
.
24
lb paper printing is only available
at
normal temperature.
*
Label
with
a Pressure sensitive paper jointed by dotted or
pasting
and
its total thickness is less
than
or equal to 0.3 mm
(0.0118”) c.m be printed out under the condition of 5’C to
35’C
.md 10% to 80% RH.
Paper feeding
methods:
Ribbon:
Mechanical
Friction
Push tractor
Cut sheet feeder (optional)
Pull tractor (optional)
Roll paper holder (optional)
Cartridge ribbon, available in black:
se.750
Life expectancy at 14 dots/character:
3 million characters
MCBF:
For all components excluding print head:
3 million lines
MTBF:
Print head
/ifez
Dimensions
and wright:
4000 power-on hours (duty 25%)
200 million strokes/wire
Height:
141 mm
Width:
416 mm (excluding platen knob)
Depth:
339 mm
Weight: ~Pprox. 5.8 kg
Electrical
Vohge:
120 VAC
+
10% (120 V model)
220 VAC
c
10% (220 V model)
240 VAC
c
10% (240 V model)
Power consumption:
28 W (self test printing: draft mode)
Frequency:
50.0
f
0.5 Hz,
6~10
2
0.5 Hz
lnsulalion
resislance:
10M ohms between AC power line
and
chassis
Dielectric
strength
fbeelween
AC line and
chassis):
I20 V model c.m
wIthstand
I 00
kV
rms
applied for
one
minute.
220/240
V model
cm
withstrnd
1.25
kV
rms
applied
for
onr
minute.
CON-
c.,
OENSE0.a.. J J
m)
LOAD/EJECT
-1
Lights
POWER (green)
0
ON LINE
On when the power switch is on
and
power is supplied.
Environment
Tempera
tore:
Humidity:
Operation:
Storage:
Operation:
Storage:
f5’C
to
+35-z
-3O’C to
f6o’C
10% to 80%
(without condensation)
5% to 65%
(without condensation)
Shock:
Vibration:
Operation:
Storage:
Operation:
Storage:
Up to 1
C
within lms
Lip
to 2
C
within
lms
Up to 0.25
G
at
up
to
55Hz
up to 0.50
c
at up to
55Hz
Operation angle:
Less than 15’ (without cut sheet feeder)
0’ (with cut sheet feeder)
Because the family of Epson printers shares
.I
great
many
commands. you
can
“se
.m
JpplicJtion
program even if it does not
list the LX-810 on its printer selection men”. If the LX-810 is not
listed, choose one of the following printers. They
.we
listed in
order of preference.
LX-600
Lx-66
LX-80
FX-850
FX-86e
EX-600
FX-85
FX-SO+
FX-80
If none of these printers is listed, select the first one available on
the following list:
Lx
FX
EX
RX
MX
Epson printer
Standard printer
Draft printer
To “se all of the features of the LX-810, however, it is best to “se
.I
program with the LX-810 on its men”. If your program does not
list any LX printers,
contact
the software manufacturer to see if
in
update is available.
READY (green)
On when the printer is
ready
to
accept
input d&e Flickers while
data
IS
printed.
PAPER OUT (red)
On when the printer is out of
paper
or when
contmuuus
p.~per
LS
in
.I
standby
position. The
printer
.~lso
beeps when it is out
0i
paper.
ON LINE (green)
On when the printer is on line
.d
ready to
accept
d.lt.1
from
the computer When
this
light
1s
flickering. the
micro-.jdlustment
ic.lturc
can be
wd.
LX-810-2
5/1/89
9 - Pin Printers
To Next Page
Loading...
Need help?
General
