How to connect an Epson POS printer with Ethernet Interface
http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]
Home Sale Specials Printers Accessories Service Support About Us Contact Catalog
Printers
TM-
U220
TM-
U200
TM-
U295
TM-
U375
TM-
T88III
TM-
U88IV
TM-
T88V
TM-
U675
TM-
U590
TM-
H6000
Power
Supplies
Interface
Cards
Cables
Ribbons
Paper
How to connect an Epson POS Printer with an Ethernet Adapter
Overview
Installing Adapter
Checking Adapter Settings
Configuring Adapter
Installing Driver
Troubleshooting
Overview
An Ethernet connection uses the existing network to connect the computer to the POS printer. The printer plugs into
the LAN and, once configured, the computer can use the printer like it was attached directly.
Required Components
Epson POS Printer with Connect-It Ethernet adapter
Local Area Network (LAN) running TCP/IP
Windows computer with LAN connection
Epson Printers Covered
TM-T88III
TM-T88IV
TM-T88V
TM-U220
TM-U230
TM-U590
TM-U675
TM-H6000III
Step by Step Installation
The installation step vary slighting depending on the type of Ethernet card you have.
Over the past few years Epson has offered 3 types of Ethernet cards, Type II, II and IV.
Each has a different set of features and a different way of setting them up.
Type II
To Next Page
Need help?
General