EasyManuals Logo
Home>eta>Vacuum Cleaner>Enzo

eta Enzo User Manual

eta Enzo
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
II. EQUIPMENT AND ACCESSORIES
A – vacuum cleaner (Fig. 1, 2, 3)
A1 – ON/OFF ( ) button
A2 – power cord winding button
A3 – knob for suction power regulation
A4 – suction vent
A5 –
depression for attachment of accessories
A6 – power cord
A7 – rear wheels
A8 – exhaust grid
A9 – output HEPA filter
B – dust container (Fig. 4)
B1 – container lock button
B2 – holder
B3 – cover lock button
B4 – cover
B5 – HEPA filter
B6 – suction filter
C – accessories (Fig. 1)
C1 – floor nozzle
C2 – parquet nozzle
C3 – upholstery nozzle
C4 – brush
C5 – crevice nozzle
C6 – suction hose
C7 – suction hose locking
C8 – telescopic suction tube
C9 – telescopic suction tube locking
C10 – mechanical suction power regulator
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories.
Remove all possible adhesion foils, stick-on labels or paper from the appliance.
VACUUM CLEANER ASSEMBLY
When assembling the vacuum cleaner, follow the procedure indicated in Fig. 1.
Choose appropriate accessories as required (C1 - C5) (Fig. 5). The telescopic suction tube
C8 can be set to an optimum length to suit the user´s height.
IV. USE OF VACUUM CLEANER
Before use, unwind (by pulling) the power cable A6 from the vacuum cleaner to a required
length and plug the vacuum cleaner to the mains.
CONTROL
A1 button -
vacuum cleaner ON/OFF switch
A2 button -
when pressed and held, the unwound part of the power cable rewinds
back inside
Knob A3 -
by turning it to the right, you increase the suction power
-
by turning it to the left, you reduce the suction power
V. REMOVING THE DUST CONTAINER AND FILTERS
Caution
Maximum suction performance can be achieved when the filters are clean and the
dustbag is empty.
Every time you empty the dust container, we recommend that you also clean the filters.
When you are vacuuming very fine dust, the filter pores might get clogged. This
reduces the air flow and the suction performance deteriorates. In such a case, the
filters need to be cleaned even though the container is not full yet.
GB
20 / 39

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the eta Enzo and is the answer not in the manual?

eta Enzo Specifications

General IconGeneral
Brandeta
ModelEnzo
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals