EvaKool INFINITY Series - EvaKool Fridge Installation Guide; Electrical Connection - 12 V or 24 V DC; Mains Power Connection

4
1. Installation
• Your EvaKool Fridge/Freezer is designed to operate from either a 12V or 24V DC power
source. It can also operate from a 240V (AC) main supply with the use of a 12V/24V
adaptor.
• When using solar power or power generators ensure that the fridge is connected
through a 12V or 24V battery. We recommend the use of anti-surge devices when there is
a possibility of ‘spikes’ from the power source.
• The recommended manner to connect your fridge is illustrated below.
• Please note: The fridge is set to cut o immediately when the voltage drops below the
sustainable level so as to protect your battery, compressor and internal circuitry. It will
start automatically when adequate power is restored.
• For maximum eiciency we recommend the fridge is installed on a level surface,
although, if necessary it will operate on surfaces up to an angle of 30°.
• IMPORTANT - DO NOT block air flow to your fridge. Ventilation is very important to
ensure eiciency and reliability. Poor ventilation will cause the compressor to overheat
and hence reduce its life span and eiciency.
Electrical Connection - 12 Volt or 24 Volt DC
Battery
Mains Connection
Solar Power