42
Car Seat Features
Seat Rotation
!
WARNING! DEATH or SERIOUS INJURY can occur.
• NEVER use this car seat in a vehicle seating position where it cannot be
secured tightly. A loosely installed car seat will not protect your child in a crash.
• The Revolve360 MUST BE LOCKED for proper use when the vehicle is
moving. This car seat is not designed to protect your child in a crash when the
seat is not locked.
• THE ROTATED POSITION IS FOR LOADING AND UNLOADING YOUR
CHILD IN FORWARD-FACING OR REAR-FACING MODE ONLY! When
properly installed, the Revolve360 rotates in its base, making it easy to safely load
and unload your child.
To rotate the Revolve360, lift up on the Rotation Handle at either
side of the headrest and turn the seat to the loading/unloading
position. The Rotation Lock Indicator will be RED.
REAR-FACING
LEVEL INDICATOR
Bead must be located
within appropriate zone.
Vehicle MUST be on level ground.
Lower Connectors/UAS
Do not install
by this method
for a child
weighing more
than 15.9 kg
(35 lbs).
Lap/Shoulder Belt
Lap Belt
Always use tether strap
in rear facing installation.
P25809042 7/20
To Next Page
Loading...
Need help?
General