Everchill WD-282FWDC-B User Manual

5
Electrical Connection
Improper use of the grounded plug can result in the risk
of electrical shock. If the power cord is damaged, have it
replaced by an authorized service center.
This refrigerator should be properly grounded for your safety.
This refrigerator requires a standard 9-17V , electricity >15A. Direct connection
with AC power source is forbidden.
Do not connect this unit to an AC power soure.
To prevent accidental injury, the electrical cord should be secured behind the
refrigerator, and not be left exposed or dangling.
Thetemperatureof refrigerator can be controlled manually by the display
However, the number shown on the display does not directly represent the
temperature. Instead, the larger the number is the lower the interior temperature
will be. Initially set the refrigerator control on the middle setting(number 3).
If you want to set the refrigerator temperature to a colder temperature pressing
the set button until the state on 4 or 5. Each time the set button is pressed, the
state increases by 1. When the state is in the highest state, press the button
again and return to the first state.
Operating Your Refrigerator
Temperature control
Power ON/OFF
To turn on and off the fridge:
To press the “SET” button in the freezing room for 10 seconds, the fridge will be at Standby
mode; The power LED “SET” will be flashing, To press “SET” button again for 10 seconds
to
turn the fridge on, and power LED light will be on.
COLDER COLDEST
TEMP.
Control
Hold 10 Sec
ON OFF

Everchill WD-282FWDC-B Specifications

General

Brand	Everchill
Model	WD-282FWDC-B
Category	Refrigerator
Language	English