36
GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please en-
sure the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [
] displays, or
when the display is dim.
AC/DC POWER ADAPTER
Only use a compatible AC/DC Power adapter (3.6V
100mA). Plug the power cable to the power jack
and the power adapter to a suitable power outlet.
NOTE: We recommend to insert batteries as backup
power source.
CLOCK
CLOCK RECEPTION
1. Replace batteries or press and hold [
] button will
initiate RCC receiving.
2. The receiving process duration is 7 minutes.
3. During receiving process, the RCC signal symbol
[
] ashes.
4. If the RCC receiving process is successful, a com-
pleted RCC symbol [
] will be shown in the dis-
play and the date and time will be set automatically.
If it fails within 7 minutes, RCC setting will quit au-
tomatically. If that happens, press and hold the [
]
button to re-initiate RCC receiving.
5. RCC receiving will automatically start at 2:03, 3:03,
4:03, 5:03 every night. Auto receiving function will
cease if it is successful.
6. To stop RCC reception, press and hold the
[
] button.
7. If the device is still not receiving the signal, please
proceed to set the time manually.
To Next Page
Loading...
Need help?
General
