RHT20 V1.0 8/09
4
Combination Lock
The logger is supplied with a wall mount case and security
combination lock. The lock is shipped with a -0-0-0- code as
viewed from the side with the alignment bar. To change the
code:
1 Press the release to open the lock (1)
2 Using a pointed object, press IN and HOLD the locking
pin on the bottom of the lock (2).
3 Set the new code (3) and release the locking pin
Warranty
EXTECH INSTRUMENTS CORPORATION (A FLIR COMPANY) warrants this
instrument to be free of defects in parts and workmanship for one year from
date of shipment (a six month limited warranty applies to sensors and cables).
If it should become necessary to return the instrument for service during or
beyond the warranty period, contact the Customer Service Department at (781)
890-7440 ext. 210 for authorization or visit our website www.extech.com for
contact information. A Return Authorization (RA) number must be issued before
any product is returned to Extech. The sender is responsible for shipping
charges, freight, insurance and proper packaging to prevent damage in transit.
This warranty does not apply to defects resulting from action of the user such
as misuse, improper wiring, operation outside of specification, improper
maintenance or repair, or unauthorized modification. Extech specifically
disclaims any implied warranties or merchantability or fitness for a specific
purpose and will not be liable for any direct, indirect, incidental or consequential
damages. Extech's total liability is limited to repair or replacement of the
product. The warranty set forth above is inclusive and no other warranty,
whether written or oral, is expressed or implied.
0
0
0
1
3
2
www.burntec.com
To Next Page
Loading...
Need help?
General
