EasyManua.ls Logo

Extraflame Pellet stove User Manual

Extraflame Pellet stove
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LED
pellet stoves UseR MANUAl
eNGlIsH/INGlese
Question and Answer IconNeed help?

Do you have a question about the Extraflame Pellet stove and is the answer not in the manual?

Extraflame Pellet stove Specifications

General IconGeneral
BrandExtraflame
ModelPellet stove
CategoryPellet stove
LanguageEnglish

Summary

PELLET STOVES USER MANUAL LED

SAFETY AND MAINTENANCE GUIDELINES

General Safety Precautions

Essential safety guidelines for operating the pellet stove and preventing hazards.

TECHNICAL SPECIFICATIONS AND STANDARDS

Reference Standards for Installation

Lists relevant UNI and EN standards for installation and components.

INSTALLATION REQUIREMENTS

Premises and Safety Distances

Specifies requirements for installation premises, including load capacity and safety distances from combustible materials.

VENTILATION AND FUMES EXHAUST

Room Ventilation and Aeration

Details sufficient ventilation requirements for the installation room based on appliance categories.

General Fumes Exhaust System Rules

Essential requirements for connecting to a suitable fumes exhaust system for safe product dispersion.

CHIMNEY CONNECTION GUIDELINES

CHIMNEY SYSTEM COMPONENTS

INSTALLATION DOCUMENTATION AND MAINTENANCE SCHEDULE

Technical Installation Documentation

Requirements for documentation provided by the installer to the owner upon completion.

Inspection and Maintenance Frequency

Details the schedule for periodic inspection and maintenance of the heating system and appliance.

INSTALLING COMFORT MAXI/PLUS INSERTS

Assembly with Sliding Base

Step-by-step guide for assembling the insert with its sliding base for installation.

FRAME ASSEMBLY AND PELLET HANDLING

Pellet Quality and Feeding

Specifies pellet standards and recommendations for diameter, and proper feeding procedures.

CONTROL PANEL OPERATION

Display Icons Key

Explains the meaning of various icons displayed on the control panel for status and operation.

GENERAL MENU NAVIGATION

REMOTE CONTROL AND INITIAL SETUP

Commissioning Settings Procedure

Steps for initial setup, including mains frequency selection and power-on.

OPERATION MODES AND LOGIC

Ignition and Start-Up Sequence

Details the process from ignition to the start-up phase and entering work mode.

Work Mode and Thermostat Settings

Describes normal operation, room temperature control, and power adjustment.

ADVANCED SETTINGS AND USER MENU

User Menu Adjustments

Accessing the user menu to adjust display brightness and pellet feed percentage.

STAND-BY FUNCTION AND KEY LOCK

Stand-By Function Configuration

Settings for the Stand-By function, including default and manual activation modes.

CLEANING AND MAINTENANCE OVERVIEW

Annual Technician Maintenance

Requirements for annual routine maintenance to be performed by authorized technicians.

User Periodic Cleaning Tasks

Guidelines for user-performed cleaning of surfaces, covering, and pellet tank.

BURN POT AND COMBUSTION CHAMBER CLEANING

REGULAR CLEANING SCHEDULE

Ash Drawer Cleaning (Every 3-4 Days)

Procedure for checking and emptying the ash drawer at regular intervals.

TECHNICIAN MAINTENANCE AND END-OF-SEASON CARE

DISPLAY STATUS INDICATORS

ALARMS AND TROUBLESHOOTING

Fumes Failure and Probe Alarms

Addresses alarms related to fumes motor faults or fumes probe issues, requiring technician intervention.

Over-Temperature and Ignition Alarms

Covers alarms for flue gas over-temperature, no ignition, and black-out conditions.

Pellet and Cooling Stand-by Alarms

Explains alarms for no pellets, cooling stand-by, and sensor/control faults.

Related product manuals