To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why my Fagor Washer machine does not start?
If your Fagor Washer machine doesn't start, several factors could be at play. Ensure the machine is properly plugged in and that the fuses are in good working order. Verify that there is mains power supply. Make sure you've pressed the Start/Pause button and that the program dial is not in the ‘stop’ position. Finally, ensure that the machine door is completely closed.
What to do if my Fagor 3FE-7212 does not intake water?
If your Fagor Washer is not intaking water, start by checking if the water tap is turned on. Inspect the water inlet hose for any twists and untwist it if necessary. Also, the water inlet hose or inlet filter might be clogged, so clean the water inlet hose filters and the inlet filters. Lastly, ensure that the machine door is completely closed.
How to fix a Fagor 3FE-7212 Washer that does not discharge water?
If your Fagor Washer isn't discharging water, the drain hose might be clogged or twisted, so check the drain hose, then either clean or untwist it. Another potential issue is a clogged pump filter, which requires cleaning. Also, ensure that the laundry isn't too tightly packed; spread your laundry evenly in the machine.
General| Door hinge | Left |
|---|---|
| Drum volume | 49 L |
| Control type | Buttons, Rotary |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Appliance placement | Freestanding |
| Drum capacity | 7 kg |
| Spin-drying class | B |
| Maximum spin speed | 1200 RPM |
| Noise level (spin) | 75 dB |
| Noise level (wash) | 58 dB |
| Number of washing programs | 15 |
| Cycle time (quick washing program) | 15 min |
| Connected load | 2100 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Energy consumption washing per cycle | - kWh |
Weight and Dimensions| Depth | 527 mm |
|---|---|
| Width | 597 mm |
| Height | 845 mm |
| Door diameter | 440 mm |
