Fermax FVQ-6040APP KIT - Addressing the Monitors (When Using more than One Monitor); Impedance Switch

6
Addressing the monitors (When using more than one monitor):
This is controlled by dip switch 6 & 7 on the back of the monitor
Type
Dip Switch Setting
Master Monitor
Slave Monitor 1
Slave Monitor 2
Slave Monitor 3
Impedance Switch
Only turn to the on position when the monitor is the end of line. This is controlled by dip switch 8 on the back of
the monitor.
Type
Dip Switch Setting
Impedance Off
Impedance On
6 7
ON
6 7
ON
6 7
ON
6 7
ON
8
ON
8
ON