EasyManuals Logo
Home>Festool>Vacuum Cleaner>Cleantec Series

Festool Cleantec Series User Manual

Festool Cleantec Series
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
CTM 48 E LE EC, CTL 48 E LE EC
GB
Risk of explosion and fire hazard: do not extract
sparks or hot dust, flammable or ex-
plosive dust (e.g. magnesium, aluminium, petrol, thinner, with the exception of wood),
aggressive fluids/solids (e.g. acid, leach, solvent).
Observe all national safety regulations as well as the material manufacturer's speci-
fications!
Do not damage the mains power cable (e.g. by driving over, dragging, etc.). Protect
from heat, oil and sharp edges. Do not pull the plug from the socket by the cable.
Check the plug and the cable regularly and have them replaced by an authorised ser-
vice workshop should either become damaged. Always replace the mains power cable
with the type specified in the spare parts list.
Do not expose the machine to rain.
For reasons of safety, never operate the machine from an unearthed socket.
Always use the machine socket for the purpose specified in the manual.
Always use original Festool accessories.
Pull the plug from the socket when the machine is not in use and prior to maintenance
and cleaning work.
Do not lift or transport using a crane hook or lifting gear!
Do not insert and remove the plug under load.
In an emergency (e.g. short circuit or other electrical faults occur), switch off the ma-
chine and pull out the mains plug.
3 Technical data
4 Intended use
CTM 48 E LE EC
:
The mobile dust extractor is de-
signed for extracting hazardous dusts with limit val-
ues up to 0.1 mg/m³ and wood dust from dust class
'M' in accordance with IEC 60335-2-69.
CTL 48 E LE EC
:
The mobile dust extractor is de-
signed for extracting hazardous dust with limit val-
ues up to 1 mg/m³ from class 'L' in accordance with
IEC 60335-2-69.
The mobile dust extractor is designed to extract wa-
ter
Mobile dust extractors
Power consumption 150 - 1100 W
Maximum appliance socket connected load EU
CH
2500 W
1200 W
Max. suction capacity (air), turbine 204 m³/h (3400 l/min)
Max. vacuum, turbine 23000 Pa
Filter surface area 6318 cm²
Suction hose D 27 mm x 3,5 m-AS
Length of the net cable 7,5 m
Sound pressure level as per EN 60704-2-1 / Uncertainty K 72 dB(A) / 3 dB
Protection category IP54
Container capacity 48 l
Dimensions L x W x H 630 x 406 x 640 mm
Weight 17,9 kg

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Festool Cleantec Series and is the answer not in the manual?

Festool Cleantec Series Specifications

General IconGeneral
BrandFestool
ModelCleantec Series
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals